Temporomandibular joint disc repositioning and occlusal splint for adolescents with skeletal class II malocclusion: a single-center, randomized, open-label trial.

BACKGROUND: Temporomandibular joint (TMJ) disc repositioning through open suturing (OSu) is a new disc repositioning method. Its result for adolescents with condylar resorption and dentofacial deformities combined with and without postoperative occlusal splints (POS) has not been well studied. OBJECTIVE: This study was to evaluate and compare the effects of OSu with and without POS in the treatment of TMJ anterior disc displacement without reduction (ADDwoR) in adolescent skeletal Class II malocclusion. METHODS: A total of 60 adolescents with bilateral ADDwoR were enrolled in this study. They were randomly allocated into two groups: OSu with and without POS. Magnetic resonance imaging (MRI) and lateral cephalometric radiographs were used to measure changes in condylar height and the degree of skeletal Class II malocclusion from before operation and at 12 months postoperatively. Changes in these indicators were compared within and between the two groups. RESULTS: After OSu, both groups exhibited significant improvements in condylar height and occlusion at the end of 12 months follow-up (P < 0.05). The group of OSu with POS had significantly more new bone formation (2.83 ± 0.75 mm vs. 1.42 ± 0.81 mm, P < 0.001) and improvement in dentofacial deformity than the group of OSu only (P < 0.05). The new bone height was significantly correlated with POS (P < 0.001), the changes of SNB (P = 0.018), overjet (P = 0.012), and Wits appraisal (P < 0.001). CONCLUSION: These findings indicated that OSu can effectively stimulate condylar regeneration and improve skeletal Class II malocclusion in adolescents with bilateral ADDwoR. The results are better when combined with POS. TRIAL REGISTRATION: This trial was prospectively registered on the chictr.org.cn registry with ID: ChiCTR1900021821 on 11/03/2019.

Comparison of two different therapeutic approaches for skeletal Class II patients with temporomandibular degenerative joint disease.

OBJECTIVES: To compare two different therapeutic approaches for skeletal Class II patients with temporomandibular degenerative joint disease. MATERIALS AND METHODS: A total of 47 patients were included in this study. Group anterior repositioning splint (ARS) was treated with temporomandibular joint (TMJ) disc surgery followed by an ARS and camouflage orthodontic treatment. Group stabilization splint (SS) was treated with an SS followed by orthodontic treatment combined with orthognathic surgery. Cephalometric analysis of lateral radiographs and measurements of condylar height were evaluated before and after splints. RESULTS: In group ARS, mandibular advancement was observed after treatment in 21 of 24 patients (87.5%). The SNB angle increased by an average of 1.40 ± 1.01°. The ANB angle, overjet, Wits, and convexity decreased. Facial angle and soft tissue N Vert to pogonion increased. Vertically, MP-FH, MP-SN, y-axis, and vertical ratio decreased and ANS-Me/N-Me and S-Go/N-Me increased, suggesting a counterclockwise rotation of the mandible. In group SS, 18 of 23 patients (78.3%) showed a backward change tendency. The SNB angle reduced by 0.90 ± 0.93°. The ANB angle, overjet, Wits, convexity, and y-axis increased. The facial angle and soft tissue N Vert to soft tissue pogonion (ST N Vert to ST pogonion) decreased. Magnetic resonance imaging showed condylar height increased by 1.45 ± 3.05 mm (P = .002) in group ARS. In group SS, condylar height change was not consistent. CONCLUSIONS: TMJ disc surgery followed by ARS promoted condylar bone remodeling and regeneration. The SNB angle increased, and the severity of skeletal Class II was improved. The SS enabled the mandible to withdraw backward and revealed a retrognathic but true mandible position.

2D-3D comparison of the temporomandibular joint in skeletal Class II versus Class I adults: A retrospective study.

OBJECTIVE: To compare the temporomandibular joint (TMJ) morphological characteristics in people with Class II versus Class I sagittal skeletal relationship and to identify other factors that influence the TMJ dimensions. MATERIAL AND METHODS: This cross-sectional and retrospective study evaluated 188 people divided into two groups, 92 cone-beam computed tomographies (CBCTs) and lateral radiographs (LR) of people with Skeletal class II relationship with Class II division 1 malocclusion versus 96 CBCTs and LR of people with Class I skeletal relationship and Class I malocclusion (controls). The CBCTs included people of both sexes, aged between 15 and 65 years old. The 3D Imaging Carestream Software was used to evaluate the condyle height and neck width, mediolateral and anteroposterior condyle dimensions, the shape of the glenoid fossa and condyle in the CBCTs. Likewise, the ANB angle, the Wits appraisal and other measurements were evaluated on LR. Besides, Mann-Whitney U, Chi2 and multiple linear regression tests were performed. The significance level was set at P˂0.05. RESULTS: The mediolateral and anteroposterior condyle dimensions were smaller in class II people (1.82mm and 0.29mm, respectively) than class I people (P<0.05). Likewise, height and neck width of condyle were smaller in class II people (0.73mm and 0.40mm, respectively) than class I people (P<0.05). Multiple linear regression identified mainly the ANB angle as a factor (P<0.05) that influenced the dimensions, decreasing the condyle dimensions in skeletal class II relationship. CONCLUSIONS: People with skeletal class II relationship showed smaller condyle dimension values than class I people. A decrease in the dimensions of the eminence and the condyle could be expected when the ANB angle increases.

Esthetic perception of facial profile changes after extraction and nonextraction Class II treatment.

This retrospective study evaluated facial profile pleasantness determined by two protocols of Class II treatment. The sample comprised facial profile silhouettes obtained retrospectively from the pretreatment (T1) and posttreatment (T2) cephalograms of 60 patients (42 males and 18 females) divided into two groups. One group of 30 patients (mean age of 12.84 years) was treated with the extraction of maxillary first premolars (mean treatment time of 2.7 years), and the other group of 30 patients (mean age of 12.81 years) was treated with a mandibular advancement appliance (Forsus) (mean treatment time of 2.49 years). The facial profile silhouettes (T1 and T2) were randomly distributed in an album containing one patient per sheet. The examiners consisted of 60 orthodontists and 60 lay individuals, who analyzed the profiles in regard to facial pleasantness, using the Likert scale. A comparison between stages T1 and T2 of the two treatment protocols and between the examiners was performed by mixed-design analysis of variance at a significance level of 5%. The results demonstrated a significant difference between T1 and T2 (greater scores for T2 compared to T1), and between lay individuals and orthodontists (orthodontists assigned higher scores), but with no significant difference between the treatment protocols. Both protocols produced positive effects on the facial profile esthetics, from the standpoint of lay individuals and orthodontists.

Preliminary comparison of three-dimensional reconstructed palatal morphology in subjects with different sagittal and vertical patterns.

BACKGROUND: The aim of this study was to assess the difference of palatal morphology in different vertical patterns between skeletal Class I subjects and skeletal Class II subjects with retrusive mandible. METHODS: Seventy-six skeletal Class II subjects with retrusive mandible (38 females, 38 males) and 85 skeletal Class I subjects (45 females, 40 males) were collected retrospectively and divided into hyperdivergent, normodivergent and hypodivergent groups. CBCT images of these subjects were reoriented by Dolphin 3D Imaging software. Three-dimensional (3D) maxilla was segmented by ProPlan software before using Geomagic Studio software to reconstruct 3D palatal morphology. Deviation patterns on 3D colored map analysis was performed to compare the difference of 3D palatal morphology between different groups. RESULTS: 3D colored map analysis showed that male's palate was higher and wider than that of female in the posterior part, regardless of different sagittal and vertical patterns. In skeletal Class II subjects with retrusive mandible, males with hyperdivergent and normodivergent showed higher and narrower in the posterior part of palate, while females with hyperdivergent and normodivergent had a higher but no obviously narrow palate compared with the hypodivergent subjects. Skeletal Class II subjects with retrusive mandible showed flatter and narrower in the posterior part of palate than that of skeletal Class I subjects. CONCLUSIONS: Sagittal and vertical patterns have great influence on the palatal morphology and as the vertical dimension increased, the palate tended to be higher and narrower.

Effects of clear aligner therapy for Class II malocclusion on upper airway morphology and daytime sleepiness in adults: A case series.

INTRODUCTION: To evaluate the effects of clear aligner therapy (CAT) on the upper airway dimensions and on daytime sleepiness in adults with dentoskeletal Class II malocclusion. METHODS: This study was conducted from August 2017 to February 2019. Inclusion criteria were healthy adults≥18years old, Angle Class II division 1 malocclusion, first-molar relationship of end-to-end or greater, overjet<10mm, and presenting for multi-arch comprehensive orthodontic treatment with aligners. Treatment mechanics included mandibular dentoalveolar advancement with Class II elastics without maxillary sequential distalization programmed into aligners. Post-treatment changes in dentoskeletal and upper airway dimensions were assessed using CBCT images. The treatment effect on daytime sleepiness was evaluated using an Epworth Sleepiness Scale (ESS). RESULTS: Eight subjects were included in this pilot study (mean age at treatment initiation=44.6years [SD=15.3]). The mean treatment duration was 12.2months (SD=3.4). No statistically significant treatment changes were observed in upper airway dimensions or dentoskeletal cephalometric analyses. Subjects with excessive daytime sleepiness at pre-treatment reported an improvement post-treatment, but no significant difference in the mean ESS score was found. CONCLUSION: Treatment of Class II division 1 malocclusion in adults by mandibular dentoalveolar advancement using CAT has no statistically significant effects on the airway and dentoskeletal measurements, or daytime sleepiness.

Esthetic perception of facial profile changes after extraction and nonextraction Class II treatment

Abstract This retrospective study evaluated facial profile pleasantness determined by two protocols of Class II treatment. The sample comprised facial profile silhouettes obtained retrospectively from the pretreatment (T1) and posttreatment (T2) cephalograms of 60 patients (42 males and 18 females) divided into two groups. One group of 30 patients (mean age of 12.84 years) was treated with the extraction of maxillary first premolars (mean treatment time of 2.7 years), and the other group of 30 patients (mean age of 12.81 years) was treated with a mandibular advancement appliance (Forsus) (mean treatment time of 2.49 years). The facial profile silhouettes (T1 and T2) were randomly distributed in an album containing one patient per sheet. The examiners consisted of 60 orthodontists and 60 lay individuals, who analyzed the profiles in regard to facial pleasantness, using the Likert scale. A comparison between stages T1 and T2 of the two treatment protocols and between the examiners was performed by mixed-design analysis of variance at a significance level of 5%. The results demonstrated a significant difference between T1 and T2 (greater scores for T2 compared to T1), and between lay individuals and orthodontists (orthodontists assigned higher scores), but with no significant difference between the treatment protocols. Both protocols produced positive effects on the facial profile esthetics, from the standpoint of lay individuals and orthodontists.

Dentoskeletal morphology in adults with Class I, Class II Division 1, or Class II Division 2 malocclusion with increased overbite.

INTRODUCTION: The treatment options for adults with increased overbite are limited to dentoalveolar changes that camouflage the condition. Because of high relapse tendency, defining the problem area is important when creating a treatment plan. This study aimed to evaluate dentoskeletal morphology in skeletal Class I and II anomalies associated with Angle Class I, Class II Division 1 (Class II/1), and Class II Division 2 (Class II/2) malocclusions with increased overbite compared with normal occlusion. METHODS: Pretreatment cephalograms of 306 patients (131 men, 175 women; overall ages 18-45 years) were evaluated. Four groups were constructed. Three groups had increased overbite (>4.5 mm): group 1 (n = 96) skeletal Class I (ANB = 0.5°-4°), group 2 (n = 85) skeletal Class II (ANB >4.5°) with Class II/1; and group 3 (n = 79) skeletal Class II with Class II/2 malocclusion. Group 4 as a control (n = 46) skeletal Class I normal overbite. Dental and skeletal characteristics of the groups were compared by sex. For statistical evaluations, analysis of variance followed by Tukey post hoc, Mann-Whitney U, and Kruskall-Wallis tests were used. Additionally correlation coefficients between overbite and skeletal/dental parameters were calculated. RESULTS: Between sexes, with regard to skeletal parameters, the men had greater values in millimetric measurements, and the women had higher SN/GoGn values. Maxillary/mandibular molar heights and the mandibular incisor heights were higher in men. In group 1, decreased lower anterior facial height (LAFH), retrusive mandibular incisors, and increased interincisal degree were determined. The maxillary molars were intrusive, whereas the vertical position of the mandibular molars and incisors in both jaws were normal. In group 2, retrognathic mandible, increased LAFH and mandibular plane angle, extrusive maxillary/mandibular incisors, protrusive mandibular incisors, and decreased interincisal degree were found. In group 3, decreased LAFH, increased interincisal degree, and retrusive incisors in both jaws were determined. There were significant negative correlations between SN/GoGN, palatal plane, and overbite in group 2 and between ANS-SN and overbite in group 3, and positive correlation between interinsical angle and overbite in all increased overbite groups. CONCLUSIONS: Dental morphology seems to be the main factor of increased overbite. Differences between groups were related primarily to inclinations and vertical positions of the incisors, rather than molar positions.

Corticotomy-assisted adult rapid maxillary arch expansion and ridge augmentation: An interdisciplinary case report with 7-year follow-up.

Adult orthodontic treatment involving maxillary transverse deficiency is a challenge for an interdisciplinary team. Surgically assisted rapid palatal expansion to segment the maxilla was once the treatment of choice, but the invasiveness, bone deficiency, and gingival recession hindered its acceptance. Corticotomy-assisted rapid maxillary arch expansion with ridge augmentation has the advantage of augmenting alveolar bony housing to accommodate and facilitate tooth movement. This approach was used to correct a severely constricted maxilla with bilateral posterior crossbite and anterior crowding in a 46-year-old man. Treatment time was 14 months. The accelerated arch expansion overcame the crossbite in 7 months, increasing intercanine distance by 5.2 mm and intermolar distance by 9.8 mm. Subsequent implant prosthesis was able to be restored in a functional normal occlusion. Satisfactory and stable clinical outcome was followed for 7 years. Corticotomy-assisted rapid maxillary arch expansion with alveolar bone augmentation is a novel and effective interdisciplinary approach for correcting adult maxillary transverse deficiency. Well controlled prospective clinical trails are warranted for further investigation.

Developmental association of palatal dimensions and palatal rugae characteristics in Angle´s classes I, II and III of malocclusion / Asociación de desarrollo de las dimensiones palatinas y las características de las rugas palatinas en las clases I, II y III de maloclusión de Angle

During development, bony changes in the palate are reflected in the palatal rugae. Therefore, we hypothesized that the palatal dimensions (PD) influence the shape and number of palatal rugae (PR). The objectives were to record the palatal rugae characteristics (PRC) and palatal dimensions (intercanine distance (ICD), intermolar distance (IMD), palatal height (PH) and palatal area (PA) in Classes I, II and III malocclusion patients and investigate their interrelationship, and statistically examine the possibility of predicting PRC with the PD. Four hundred eighty-one pre-orthodontic study casts of healthy patients with normal palate anatomy were grouped as Classes I, II and III and scanned using 3D cast scanner. The PRC, ICD, IMD, PH, and PA were recorded digitally using 3D enabled software. The data was statistically analyzed. A strong statistically significant difference was observed between PA and number of straight and wavy rugae. ICD and the number of straight rugae were also related. A weak correlation exists between malocclusion classes and PA. The remaining rugae characteristics did not exhibit any relation with palatal dimensions. PA is positively related to the number of straight rugae and negatively related to the number of wavy rugae. Bigger palates have more straight rugae and less number of wavy rugae. A weak correlation between PA and Angle's class I malocclusion exists. We also propose that PA has a developmental association with the number and shape of PR.

Durante el desarrollo, los cambios óseos en el paladar se reflejan en las rugas palatinas. Por lo tanto, planteamos la hipótesis de que las dimensiones palatinas influyen en la forma y el número de las rugas palatinas. Los objetivos fueron registrar las características de las rugas palatinas y las dimensiones palatales (distancia intercanina, distancia intermolar, altura palatina y área palatina) en pacientes con maloclusión de clases I, II y III e investigar su interrelación, y examinar estadísticamente la posibilidad de predecir las características de las rugas palatinas con las dimensiones palatinas. Cuatrocientos ochenta y un estudios pre-ortodónticos de pacientes sanos con anatomía normal del paladar se agruparon como Clases I, II y III y se escanearon con un escáner de emisión 3D. La distancia intercanina, distancia inter molar, altura palatina y área palatina se registraron digitalmente utilizando el software 3D. Los datos se analizaron estadísticamente. Se observó una diferencia estadísticamente significativa entre la altura palatina y el número de rugas rectas y onduladas. Se registró también la distancia intercanina y el número de rugas rectas. Existe una correlación débil entre las clases de maloclusión y la altura palatina. Las características restantes de las rugas palatinas no mostraron ninguna relación con las dimensiones palatinas. El área palatina está relacionada positivamente con el número de rugas rectas y negativamente relacionada con el número de rugas onduladas. Los paladares más grandes tienen más rugas rectas y menor cantidad de rugas onduladas. Existe una correlación débil entre el área palatina y la clase I de maloclusión de Angle. También proponemos que el área palatina tiene una asociación de desarrollo con el número y la forma de rugas palatinas.

Are Noffel's danger signs pathognomonic of class II division 2? A retrospective comparative study.

INTRODUCTION: The 3 Noffel signs, "Ramal height", "Smiling chin", and "B-line space", often present in class II division 2, are called "danger signs" for aesthetics, when they are strongly marked and absolutely need to be taken into account in the therapeutic strategy. The main objective was to assess whether the three measurements associated with Noffel signs (Gonion/Articulare distance, Cutaneous Pogonion/Na-B, and B-line space) were pathognomonic of class II division 2. The secondary objective was to determine whether there was a correlation between the severity of Noffel signs and the sagittal and/or vertical skeletal severity of class II division 2. MATERIALS AND METHODS: In this comparative, mono-centric study based on a retrospective cohort, lateral cephalograms of all the growing patients who were treated at the CSERD between 2012 and 2018 and had normodivergent and hypodivergent profiles, were analysed. RESULTS: The logistic regression analysis showed that only "Total chin" and "B-line space" were significantly related to class II division 2 (P=0.00199; P=0.00778, respectively). The three signs were related to the severity of the hypodivergence, but not to the severity of skeletal class II. CONCLUSION: Only "Total chin" and "B-line space" are pathognomonic of class II division 2. The correlation between the severity of Noffel's three signs and skeletal severity exists only in the vertical dimension.

Changes in cross-sectional measurements of masseter, medial pterygoid muscles, ramus, condyle and occlusal force after bi-maxillary surgery.

PURPOSE: The purpose of this study was to examine changes in masseter and medial pterygoid muscles, ramus, condyle and occlusal force after bi-maxillary surgery in class II and III patients. SUBJECTS AND METHODS: The subjects were 42 patients (84 sides) who underwent sagittal split ramus osteotomy with Le Fort I osteotomy (21 class II cases: mandibular advancement and 21 class III cases: mandibular setback). The cross-sectional measurements of the masseter and medial pterygoid muscles, ramus and condyle were measured in horizontal plane images by computed tomography (CT), before and 1 year after the operation. Occlusal force and contact area were also recorded before and 1 year after the operation. RESULTS: Preoperatively, class II was significantly larger than class III in masseter width (P = 0.0068), masseter area (P < 0.0001) and medial pterygoid length (P < 0.0001). However, class II was significantly smaller than class III in medial pterygoid width (P < 0.0001). After 1 year, class II was significantly smaller than class III in masseter length (P = 0.0017). Class II was still larger than class III in medial pterygoid area after 1 year (P = 0.0343). Class II was significantly larger than class III in condylar angle pre-operatively (P < 0.0001) and after 1 year (P = 0.0006). After 1 year, class II decreased significantly more than class III in condylar thickness (P = 0.0020), condylar width (P < 0.0001) and condylar area (P < 0.0001). CONCLUSION: This study suggested that changes in the cross-sectional measurements of masseter and medial pterygoid muscles and the condyle differed between class II and class III patients, although occlusal force did not significantly change 1 year after surgery in both groups.

Bilateral dentoalveolar asymmetries in female patients with adolescent idiopathic scoliosis.

PURPOSE: The aim of this cross-sectional research was to quantify left-right dentoalveolar fluctuating (FA) and directional asymmetries (DA) in patients with adolescent idiopathic scoliosis and to assess the relationship between these asymmetries and the side, location, and severity of scoliosis. MATERIALS AND METHODS: The study group comprised of 60 females aged 12-16 years, with idiopathic scoliosis, and 54 healthy controls. Measurements were made with the use of digital caliper on full-mouth dental casts. The following variables were measured from each subject: a shift of the incisor midline, left and right incisor overjet, deviation of canine and buccal segment relation as well as maxillary and mandibular arch chords. The data were statistically analyzed with significance taken as p < 0.05. RESULTS: Statistically significant differences in the mean shift of the incisor midline, buccal segment relation on the left and canine deviation on the left between the control group and the study group were detected ( p = 0.0419, p = 0.0.458 and p = 0.0204, respectively). FA of the midline deviation and canine deviation were statistically significantly higher for subjects with IS, compared to healthy controls ( p = 0.0315 and p = 0.0415, respectively). Neither direction of the curve nor apical vertebra's location or apical translation significantly affected the magnitude of dentoalveolar asymmetries. CONCLUSIONS: Our results confirmed that bilateral asymmetries are a common feature of the young females' occlusion. Individuals with IS show higher tendency to Angle Class II malocclusion, as well as higher FA of incisor midline discrepancy and canine deviation, compared to the controls.

Relationships among tongue volume, hyoid position, airway volume and maxillofacial form in paediatric patients with Class-I, Class-II and Class-III malocclusions.

OBJECTIVES: To clarify the associations among tongue volume, hyoid position, airway volume and maxillofacial form using cone beam computed tomography (CBCT) data for children with Class-I, Class-II and Class-III malocclusion. SETTING AND SAMPLE POPULATION: Sixty children (mean age, 9.2 years) divided into Class-I, Class-II and Class-III malocclusion groups according to the A-nasion-B angle. MATERIAL AND METHODS: Cone beam computed tomography was used for three-dimensional reconstruction of the maxillofacial region and airway. The hyoid position and the tongue, airway and oral cavity volumes were evaluated. Upper airway ventilation status was calculated using computational fluid dynamics. The groups were compared using analysis of variance and Kruskal-Wallis tests; relationships among the parameters were assessed using Pearson's and Spearman's rank correlation tests. RESULTS: The tongue volume was larger in Class-III patients (50.63 cm3 ) than in Class-I patients (44.24 cm3 ; P < 0.05). The hyoid position was lower (49.44 cm), and anatomical balance (AB; tongue volume/oral cavity volume; 85.06%) was greater in Class-II patients than in Class-I patients (46.06 cm, 80.57%, respectively; P < 0.05 for both). The hyoid height showed a positive correlation with AB (r = 0.614; P < 0.001). CONCLUSIONS: Children with Class-III malocclusion have large tongue volumes and small AB; the reverse is true for children with Class-II malocclusion. The hyoid position is closely associated with AB in children with malocclusion.

Soft- and hard-tissue changes following treatment of Class II division 1 malocclusion with Activator versus Trainer: a randomized controlled trial.

Background: Increased awareness on the role of oral functions in the aetiology of Class II deformities has led to the wide spread of myofunctional training appliances as easy and possibly effective treatment for children with Class II malocclusion but their efficacy is yet to be proven. Objectives: To evaluate soft- and hard-tissue changes following 12 months of Class II division 1 treatment in growing patients with a conventional functional appliance (a modified Activator) versus a myofunctional Trainer system (T4K®). Setting and sample population: Department of Orthodontics, Dental School. Participants, study design, and methods: Sixty Class II division 1 children (8-12 years old) were recruited from primary schools and were distributed randomly into two equal groups. Randomization was based on a computer-generated sequence of random numbers. Data analysis included: the Activator group (28 patients, mean age = 10.6 ± 1.3 years); the T4K® group (26 patients, mean age = 10.3 ± 1.4 years). Skeletal, dentoalveolar, and soft tissues changes were assessed using standardized lateral cephalograms collected before and after 12 months of treatment. No blinding was applied in this trial. Results: Improvement in the Class II skeletal and dentofacial characteristics were significantly greater in the Activator group when compared with the T4K® group. The improvement was evident in a significant decrease in the skeletal angle ANB with Activator (x¯ = -1.89 ± 1.12) compared to T4K® (x¯ = -0.9 ± 1.01) (P = 0.01), a significant greater increase in the facial convexity angle with Activator (x¯ = 2.61 ± 3.71) more than T4K® (x¯ = 0.2 ± 2.51) (P = 0.04), and a significant reduction in the overjet (x¯ = -3.0 ± 2.3 mm) compared to (x¯ = -1.5 ± 1.9 mm; P = 0.01) with Activator versus T4k®, respectively (P = 0.001). Limitations: This study was a short-term study (12-month follow-up). Conclusions: The results of the current study indicated that the Activator was more effective than the T4K® in treating Class II division 1 growing patients. Registration: The trial was not registered in any major database of clinical trials. Protocol: The protocol was not published before the commencement of the trial but can be given upon request.

Osseous changes of the mandibular condyle affect backward-rotation of the mandibular ramus in Angle Class II orthodontic patients with idiopathic condylar resorption of the temporomandibular joint.

Objective: To evaluate whether osseous changes of the temporomandibular joint (TMJ) condyle affect backward rotation of the mandibular ramus in Angle Class II orthodontic patients with idiopathic condylar resorption (ICR). Methods: Twenty Japanese women with Class II malocclusion with ICR (ICR group) and 24 women with Class II malocclusion without ICR (non-ICR group) were examined. Pre-treatment panoramic radiographs were used to measure condylar ratios. Pre-treatment lateral cephalograms were used to evaluate maxillofacial morphology. Results: The ICR group had a significantly smaller condylar ratio, greater backward rotation of the ramus, less labially inclined upper incisors, and a steeper occlusal plane. The increased backward rotation of the ramus in the ICR group was significantly associated with a smaller condylar ratio. Conclusion: Angle Class II patients with ICR had shorter condylar height attributable to osseous changes of the TMJ condyle, and the shorter condylar height may affect subsequent backward rotation of the ramus.

Relationship between Cervical Spine and Skeletal Class II in Subjects with and without Temporomandibular Disorders.

Aim: To assess changes in the craniocervical structure and in hyoid bone position in skeletal Class II subjects with and without temporomandibular disorders (TMD). Materials and Methods: The cephalometric analysis of 59 subjects with skeletal Class II was evaluated and compared. The measurements considered were ANB as a parameter of Class II and C0-C1 distance, C1-C2 distance, craniocervical angle, and hyoid bone position for the cervical spine analysis. Patients were divided into patients with TMD (group A) and patients without TMD (group B). TMD were evaluated with Diagnostic Criteria for TMD (DC/TMD). Descriptive statistics and Pearson's and Spearman's correlation analysis, with p value <0,005, were performed. Results: C0-C1 and C1-C2 distance values and hyoid bone position resulted within the normal range in the majority of patients examined. Craniocervical angle was altered in 33 patients. The reduction of this angle with the increase of the ANB value resulted to be statistically significant in group A, according to Pearson's correlation index. No other data were statistically significant. Conclusions: The significant relationship between skeletal Class II and cervical spine cannot be highlighted. The alteration of craniocervical angle seems to be mildly present, with backward counterclockwise rotation of the head upon the neck in the sample (groups A and B). The presence of TMD as a key factor of changes in neck posture could explain the different result between the two groups about the relationship between ANB and craniocervical angle. This result should be further analyzed in order to better understand if cervical spine changes could be related to mandibular postural ones in the craniocervical space or to temporomandibular joint retropositioning, more recognizable in Class II with TMD, which could determine functional changes in other structures of this unit; neck posture could be the result of a compensatory/antalgic mechanism in response to TMD.

Effect of posterior space discrepancy and third molar angulation on anterior overbite.

INTRODUCTION: In this study, we aimed to determine the effect of maxillary and mandibular posterior space discrepancies and third molar angulations on the overbite. METHODS: Pretreatment lateral cephalograms of 131 subjects were analyzed. The sample included 83 open-bite and 48 deepbite subjects. A multiple regression analysis was used to evaluate the influence of maxillary and mandibular posterior space discrepancies and third molar angulations (predictor variables) on overbite. Correlations between posterior space discrepancy and third molar angulation, and correlations between predictor variables and dental angulation and height of posterior teeth and incisors were evaluated with the Pearson correlation coefficient. Subgroups with accentuated negative overbite and deepbite (27 open-bite, 37 deepbite) were compared with t tests. RESULTS: The multiple linear regression analysis showed a positive association of the mesial angulation of the mandibular third molar with overbite. Posterior space discrepancy was negatively associated with posterior teeth mesial angulation and dentoalveolar height. However, these associations were weak, with no clinically significant implications. The deepbite subgroup showed significantly greater mesial angulation of the mandibular third molars than did the open-bite subgroup. CONCLUSIONS: There was no clinically significant effect of posterior space discrepancies and third molar angulations on overbite and dental angulation and height of posterior teeth and incisors.

Comparative Assessment of Facial Asymmetry in Malocclusion using Posteroanterior View.

AIM: The study was conducted to assess facial asymmetry in various dental malocclusions and to determine asymmetry in lower, mid, and upper face and jaws using posteroanterior cephalometric analysis. MATERIALS AND METHODS: Overall, 120 posteroanterior cepha-lograms were taken of individuals between 12 and 25 years of both sexes, and were divided into four groups: Angle's class I excellent occlusion, Angle's class I malocclusion, Angle's class II malocclusion, and Angle's class III malocclusion. These cepha-lograms were traced and Grummon's analysis was performed. RESULTS: In Angle's class I occlusion and Angle's class II malocclusion, the results obtained showed asymmetry present in the upper face. Correlation was found between occlusion, maloc-clusion, and facial asymmetry. CONCLUSION: Facial asymmetry was found in all dental occlusions whether excellent or malocclusion group, with maximum asymmetry having upward trend toward upper face starting from lower. CLINICAL SIGNIFICANCE: For the success of the orthodontic treatments in various types of malocclusion and to determine the facial asymmetry, posteroanterior view can be very helpful, as it gives additional information which can be utilized to augment treatment planning and improve prognosis in terms of relapse prevention.

Three-dimensional assessment of the middle cranial fossa and central skull base following Herbst appliance treatment.

OBJECTIVES:: The purpose of this three-dimensional (3D) study was to assess retrospectively the middle cranial fossa and central skull base of patients treated with the Herbst appliance (HA). MATERIALS AND METHODS:: 3D surface virtual models of 40 Class II, division 1 malocclusion patients were generated from cone-beam computed tomography (CBCT) acquired before treatment (T0) and after 8 months of HA treatment (T1). T0 and T1 3D models were superimposed volumetrically at the anterior cranial fossa. Twenty subjects who had been treated with the Herbst appliance (HAG) were compared to 20 subjects who were not treated orthopedically. The latter group served as a comparison control group (CG). Quantitative assessments of the location and directional changes were made with linear and angular measurements between anatomical landmarks. Qualitative assessments of the spatial behavior of the middle cranial fossa and central skull base relative to the anterior cranial fossa were displayed graphically for visualization with color maps and semitransparent overlays. Non-parametric tests were performed to compare the between the HAG and CG. RESULTS:: Point-to-point linear measurements and skeletal rotation (pitch, roll, and yaw) changes were very small along the observational period and were not significantly different between HAG and CG. Visual analysis of color maps and overlays confirmed that no changes in the cranial base were associated with HA. CONCLUSIONS:: HA therapy did not produce clinically significant changes in the middle cranial fossa and central skull base.